13 Mar 2020

Toshiba Printer Default Passwords TopAccess

Toshiba Printer Default Passwords TopAccess

The Toshiba default username is “admin” and the default password is “”.

Toshiba Printer passwords: General rules

Most printers have a username and password to enter Machine Administrator mode. By default the username and password are identical. However, there are exceptions where a machine will have the same combination of username and password as the rest of the machines in the same model group.

If the default password is not working, to reset the password do the following:

Power on the printer while holding 08 then type 263, input your new pass, ENTER, Power off

To get into service mode 08, just press OK.

If you get completely stuck and can not obtain the service password, you can reset it via the following method.
Hold down while starting the copier up. [4] + [8] + [9] + [POWER]This will reset the administrator password AND service password.
Remember you will lose all user data when this is done!

TopAccess Username & Password Printer Username & Password
E-Studio 287csAdmin123456
E-Studio 2500cAdmin123456
E-studio 2555cAdmin123456
E-Studio 3530CAdmin123456
E-Studio 2540CAdmin123456
E-Studio 4540cAdmin123456


04 Apr 2017

How to set up multiple screens/monitors when connected to a server via Remote Desktop (RDP)

In the Below steps, we will describe How to set up multiple screens/monitors when connected to a server via Remote Desktop

1 Open Remote Desktop client.

2 Click Show Options from bottom left corner of the window.

3 Click Display tab from the top menu.

Remote Desktop Settings

4 Click checkbox Use all my monitors for the remote session.

5 Optional select Color Depth Profile. This improves performance over slower connections!

6 Click General tab from the top menu, then click Save to save your Settings.

Remote Desktop Settings


10 Feb 2017

Kyocera Default Passwords Command Centre

Kyocera Default Passwords

Kyocera machine passwords: General rules

1.Most machines have a username and password to enter Machine Administrator mode. By default the username and password are identical. They usually consist of the A4 speed of the machine followed by 00. However, there are exceptions where a machine will have the same combination of username and password as the rest of the machines in the same model group.
2. Some machines have a Machine Administrator and an Administrator, who have different permissions. The default username and password for the Administrator is Admin and Admin
2.There are two main variations of Kyocera Command Center. If your version has Kyocera Command Center RX at the top of the page then you will have a default username of Admin and default password of Admin. If you do not have the RX version there will either be no password or a default password of admin00.

Command Center Username & Password Machine Username & Password
ModelUsernamePassword ModelUsernamePassword
KM-2560NothingNothing when defaultKM-256025002500
520iNo Defaultadmin00520i52005200
Command Center Username & Password Machine Username & Password
Color Color
205cNothing when defaultadmin00205cAdminAdmin


Model No.Default Admin NameDefault Admin PasswordKyocera Command Centre Password
 TASKalfa 18118001800admin00
 TASKalfa 22122002200admin00
 TASKalfa 300i30003000admin00
 TASKalfa 420i42004200admin00
 TASKalfa 520i52005200admin00
 TASKalfa 62062006200admin00
 TASKalfa 82082008200admin00
 TASKalfa 3500i35003500Admin/Admin
(User name/Password)
 TASKalfa 4500i45004500Admin/Admin
(User name/Password)
 TASKalfa 5500i55005500Admin/Admin
(User name/Password)
 TASKalfa 6500i65006500Admin/Admin
(User name/Password)
 TASKalfa 8000i80008000Admin/Admin
(User name/Password)
 TASKalfa 250ci25002500admin00
 TASKalfa 300ci30003000admin00
 TASKalfa 400ci40004000admin00
 TASKalfa 500ci50005000admin00
 TASKalfa 552ci55005500admin00
 TASKalfa 2550ci25002500Admin/Admin
(User name/Password)
 TASKalfa 3050ci30003000Admin/Admin
(User name/Password)
 TASKalfa 3550ci35003500Admin/Admin
(User name/Password)
 TASKalfa 4550ci45004500Admin/Admin
(User name/Password)
 TASKalfa 5550ci55005500Admin/Admin
(User name/Password)
 TASKalfa 6550ci65006500Admin/Admin
(User name/Password)
 TASKalfa 7550ci80008000Admin/Admin
(User name/Password)
(User name/Password)
(User name/Password)
(User name/Password)
(User name/Password)
(User name/Password)
(User name/Password)
05 May 2016

Migrate Xenserver vm to Vmware

Changing hardware and hyper-visors can be challenging, especially from Xen to vmWare ESXI 6!

What I had to try and was not successful or was time-consuming:

1 Export Xenserver vm to OVF format and try to import in vmWare vSphere – the process of exporting was terribly slow and over 15Gb of data exported would just hang long periods of time before adding some extra megs of data to the exported file. (not suitable for bigger vm’s)

2 Export vm to XVA format with XenCenter, then follow the tutorial found here but for some reason, I did not manage to get same results on step described at section 2.3, still, this could be my mistake or maybe the poorly described steps in the respective tutorial.


The How to MIGRATE Xenserver vm to Vmware ESXI 6 tutorial.

Below I will describe how we managed to migrate successfully a Linux vm from XenServer to Vmware. the purpose of the following tutorial is to serve others as a sample. Different configurations might require small adjustments to the migration process!


1. ALWAYS Backup – export your vm to XVA via XenCenter as it seems it is the most reliable form of backup for XenServer.

2. Take note of the Disk of the VM you intend to migrate.  WinSCP or any other piece of software that give’s you access to XenServer Host Storage, navigate to “/var/run/sr-mount/” browse each folder and find the corresponding VHD.

3. Copy the VHD file out of the Xenserver Storage.

4. Use StarWind V2V  and convert VHD file to VMDK.

5. Create a Linux VM with similar hardware configuration like the one you intended to migrate.

6. Copy the generated VMDK file on Vmware Datastore in “/vms/volumes/xxx-xxxx-xxx-xxxx/createdVMname/”  xxx-xxxx-xxx-xxxx holds place for the folder where vm was created in (just browse each weird named folder and find your VM storage)

7. Login over ssh in Vmware machine and navigate to “/vms/volumes/xxx-xxxx-xxx-xxxx/createdVMname/”

8. Run this command: “vmkfstools -i your-copied-file-name.vmdk your-new-filename-converted.vmdk -d thin” Replace file names with corresponding names.

9 Go to vSphere and EDIT Settings of the VM, by adding a new Hard Disk, Select “USE AN EXISTING VIRTUAL DISK”, Browse Datastore1 for “your-new-filename-converted.vmdk” (file name is whatever you named the converted file in step 8)

10 Remove any other Hard disks and leave the “your-new-filename-converted.vmdk” imported one ONLY.

11. Power your VM and you should be able to Login in your migrated VM.

12 Setup your network,

Enjoy your migrated VM! 🙂




21 Apr 2016

Performance increase on Arknet hosting Servers

We took necessary time and upgraded our Hosting servers infrastructure to better serve our clients!

Some of the Benefits you will have are:

  • Super fast website  content delivery (offering your clients / website visitors a pleasant experience).
  • Increased reliability of our new hardware.
  • Improvements to our Web servers to accommodate best WordPress hosting.
  • Optimised Database servers

We tested previous network performance and overall we manager to improve it considerable.

Most of our clients will benefit 3 x faster page loads… THAT IS SOMETHING!


20 Sep 2014

New Web Site Design sanmarcopainters.com.au

San Marco Deco Painting Contractors is using ARKNET Web Design and Web Hosting services to reach their customers.

Services ofered by ARKNET to San Marco Deco Painting Contractors:
– Professional Web Design
– Graphic Design
– SEO (Search Engine Optimisation)
Managed Business Web Hosting

About San Marco Deco Painting Contractors

San Marco Deco Painting Contractors is a full service painting and decorating company with a focus on individual service and attention to detail that delivers results in a personal, professional, and cost-effective manner. Additionally, we continually research the latest innovations in finishes and design, enabling us to offer our clients the best products and services available.

© 2017 ARKNET PTY LTD. All rights reserved.

back to top